Oil & Petroleum Testing Equipment

Cloud And Pour Point Apparatus
Code: ZI - P - 102
Description:

Flash Point Apparatus
Code: ZI - P - 103
Description:
Flash Point-Cleveland
Ref. Standards
IS : 1448 (Part 69), ASTM D 92,
IP 36, BS:4689, ISO 2592
For determining the flash and fire points of petroleum products, except fuel oils and those products having and open cup flash below 79° C (175° F)

ZI-P-103 : Flash Point (Open) and Fire Point Cleveland, Electrical Heating with NPL Certificate

ZI-P-104 : Flash Point (Open) and Fire Point Cleveland, Electrical Heating without NPL Certificate

Flash Point - Abel
Code : ZI - P - 105
Abel Flash Point Apparatus with NPL Certificate

Description: Electrical Heating, with gas test jet and electric heater with ZI-P-10502. Energy regulator. Suitable for operation on 220V, single phase, 50Hz, AC Supply.

For determining closed cup flash point of petroleum products, their mixtures, other liquid and paints, having flash points between 19°C and 49°C. Each instrument bears a test certificate of the national physical laboratory and is supplied complete with an oil cup, cover fitted with gas test jet assembly, water bath and tripod stand, but without thermometer, in a wooden carrying case.

Flash Point (Closed) Pensky-Martens Apparatus
Code: ZI - P - 107
Description: Pensky-Martens Apparatus with NPL Certificate, electrical heating, with gas test jet and electric heater with ZI-P-10303.

Energy regulator. Suitable for operation on 220, 50 Hz, Single Phase, AC Supply. Complete in wooden carrying case.

Redwood Viscometer
Code: ZI - P - 115
Ref. Standard IP 70

Description: These instruments are for determining the viscosity of all oils, expressed in Redwood seconds at the temperatures of test as called for by IP 70. Both the types of viscometers. Redwood No. 1 and Redwood No. 2 electrical heating models are available. The viscometers consist of a heavily silver plated brass oil cup with a precision stainless steel jet assembled in a chromium plated both fitted with a heating tube or heating element and drain cock. The bath and cup assembly is mounted on a stand with leveling feet. Each unit is supplied complete with silver plated ball value, spirit level and cover, the thermometer clip and receiver of capacity 50 ml.

Saybolt Viscometer
Code: ZI - P - 116
Ref. Standards ASTMD 88, D 244, AASHTO T 72 ZI-P-116

Description: Saybolt Viscometer, electrically heated, ASTM D 88, D244, AASHTO T 72 for the empirical measurement of saybolt viscosity of petroleum products at specified temperatures between 70° F and 210° F. This is also used for determining the saybolt furol viscosity of bituminous materials at temperatures of 250, 275, 300, 350, 400 and 450° F. It comprises one each of cylindrical oil cup, universal tip, furol tip, bath fitted with immersion heater mounted on a stand. Dimmerstat for temperature control, stirrer with shield. Complete with insulated handle and thermometer support, receiving flask, withdrawal tube, filter funnel, thermometer support for cup and circular spirit level. Suitable for operation on 220V. 50Hz, Single phase. AC supply.

Standard Tar Viscometer
Code : ZI - P - 117
Ref. Standards IS: 1206, IP 72, STPTC.RT 2, RT 3, BS: 2000, (Part 72)

Description: For determining the viscosity of cut back bitumen and road oil. The viscometer consists of a chrome plated copper bath, with a drain value and a central tube to receive the test cup and to position the stirrer, and is mounted on a stand with leveling feet. Stirrer has a curved shield and is provided with an insulated handle, thermometer socket and swivel support for the value. Supplied complete with 10mm cup and ball value or 4mm cup and ball valve as per the model required. The following models are available:

ZI-P-117
Standard Tar Viscometer, electrical heating with immersion heating elements and dimmerstat for controlling the temperature.

Suitable for operation on 220V, 50Hz, single phase, AC supply. Complete with 10mm/4mm cup and value.

Flow Cup
Code: ZI - P - 120
Description: Flow cup no. 4 with NPL calibration certificate. IS: 3944

Code: ZI-P-121
Description: Flow cup no. 4 without NPL calibration certificate. IS: 3944

Simple flow cup of the efflux type is used for approximate measurements of apparent viscosity for control for consistency during manufacture and use of paints, lacquers and viscous products. Flow cups with protective skirt are made from gun metal with stainless steel orifice and are equivalent to type B cups. Each cup is supplied complete with a stand having leveling screws.